Hitachi VSP Gx00 series User Manual

Before you begin
■
Y
ou must have the Security Administrator (View & Modify) role to perform this task.
Procedure
1. In the Administration tree, select User Groups.
2. In the User Groups tab, click Create User Groups to open the Create User Group
window.
3. Enter a user group name.
4. If you use an authorization server, click Check and verify that the entered user
group name is registered in the authorization server.
5. Click Next to open the Assign Roles window.
6. Select the roles to assign to the user group, and click Add.
7. Click Next to open the Assign Resource Groups window.
8. Select the resource groups to assign to the user group, and click Add. If you select a
role other than the storage administrator in the Assign Roles window, you do not
need to select resource groups because all the resource groups are assigned
automatically.
9. Click Finish to nish and conrm settings.
Click Next to add another user.
10. Check the settings and enter a task name in Task Name.
11. Click Apply. The task is now registered. If the Go to tasks window for status check
box is checked, the Task window opens to show the status of the task.
Changing a user group name
You can change the name of a user group by using Hitachi Device Manager - Storage
Navigator.
Before you begin
■
You must have the Security Administrator (View & Modify) role to perform this task.
■
The names of built-in groups cannot be changed.
■
A user group name consists of 1 to 64 characters including alphanumeric characters
(ASCII), spaces and the following symbols:
# $ % & ' ( ) + - . = @ [ ] ^ _ ` { } ~
Procedure
1. In the Administration tree, select User Groups.
2. In the User Groups tab, select the user group.
3. Click More Actions > Edit User Group.
4. In the Edit User Group window, enter a new user group name.
5. If you use an authorization server, click Check and verify that the entered user
group name is registered in the authorization server.
6. Click Finish.
7. In the Conrm window, check the settings and enter a task name in Task Name.
8. Click Apply. The task is now registered. If the Go to tasks window for status check
box is checked, the Task window opens to display the status of the task.
Changing a user group name
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 91

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English