Hitachi VSP Gx00 series User Manual

Task
Block-only storage
systems (no NAS
modules installed)
Block and file storage systems
(NAS modules installed)
Installing licenses Maintenance utility
See License keys (on
page 187)
NAS Manager
See License keys (on page 187)
Enabling and disabling
licenses
Maintenance utility
See License keys (on
page 187)
NAS Manager
See License keys (on page 187)
Removing licenses Maintenance utility
See License keys (on
page 187)
NAS Manager
See License keys (on page 187)
System administration using the maintenance utility
Changing the date and time
To keep the date and time on the storage system controller, the SVP, and NAS modules in
sync, you must change the date and time settings on all. This section includes
procedures to change all settings.
Changing the controller clock settings
Complete the following steps to change the date and time on the storage system
controller.
Before you begin
■
You must have the Storage Administrator (View & Modify) role to perform this task.
Procedure
1. In the maintenance utility Administration tree, select Date & Time.
The current settings are displayed.
2. Click Set Up.
3. Change the settings as needed, and either click Apply to save them, or click Cancel
to close the window without saving the changes.
Changing the SVP clock settings
Complete the following steps to change the Windows 7 date and time on the SVP.
Before you begin
■
The management console is connected to the LAN 2 port on the SVP.
System administration using the maintenance utility
Chapter 3: Conguring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 48

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English