7. If ther
e is more than one server, the list can be prioritized using Move Up or Move
Down .
8. Click Apply to submit this page and save the connection settings and server list to
the SMU database.
The SMU will perform a connection test to check that it can access the conî ´gured
servers with the supplied details and display a warning if the SMU cannot, giving the
user the opportunity to modify the settings or to save them as they are.
Any information, warnings and errors related to Active Directory conî ´guration or
authentication are logged to /var/opt/smu/log/mgr/mgr.log
and /var/opt/smu/log/mgr/security.log
Configuring Active Directory groups
Before Active Directory users can log into the SMU, you must conî ´gure one or more
Active Dir
ectory groups. After a group has been added and saved, members of that
group can log into the SMU using their Active Directory name and password. Active
Directory users belonging to the subgroups of the conî ´gured group also have SMU
access.
Before you begin
Note that the administrator is only able to conî ´gure groups after Active Directory servers
have been added on the Active Directory Servers page.
Procedure
1. Navigate to the Home > SMU Administrator > Active Directory Groups to display
the Active Directory Groups page.
This page shows all Active Directory groups that have been added. Note that Active
Directory groups can be associated with a group access level. For example, it is
possible to deî ´ne a group of users who only have server level of access. Any groups
that were added in a previous version of the SMU that has been upgraded will be
displayed in this list with a User Level of Global Administrator.
If an Active Directory user is member of more than one conî ´gured groups in the
SMU, then their access level will be derived by combining the access level for all
conî ´gured Active Directory groups. For example, if a user is a member of one group
deî ´ned with storage level, but is also a member of a group with server level, then
that user will have server+storage access to the SMU.
Conî ´guring Active Directory groups
Chapter 5: Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 166
To Next Page
Loading...
Need help?
General
