Hitachi VSP Gx00 series User Manual

3. In T
rap Destination, click the type of address to send the SNMP trap information:
Community or Public.
4. Click Add to add an SNMP trap address.
5. In Community, cr
eate a new community name or select an existing one.
6. In Send Trap to, enter a new IP address or select an existing one.
7. Click OK to save the information and close the dialog box.
Sending test messages
The lower section of the Alert Notications window contains three tabs: Email, Syslog,
and SNMP. Select the desired tab to send a test message of the type specied in the tab
name.
Sending a test email message
Pr
ocedure
1. Click the Email tab.
The Email tab displays the current settings for the mail server, SMTP
authentications, and email addresses.
2. Click Send Test Email.
A completion notice displays.
3. Click OK to acknowledge the notice and close the message.
Example of a test email message
Subject: VSP Gx00 Report
D
ATE : 24/10/2014
Sending test messages
Chapter 6: Alert
notications
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 181

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English