Hitachi VSP Gx00 series User Manual

Item Description
iSCSI Target Name Name of the iSCSI target
Resource Group Name Resource Group Name where the host group belongs
Resource Group ID Resource Group ID where the host group belongs
Number of LUNs The number of LU paths dened to the host group
Number of LDEVs The number of logical volumes that are accessible from the hosts in the
host gr
oup
Number of PGs The number of parity groups with logical volumes that are accessible from
the hosts in the host group
Number of DKBs The number of disk boards controlling the parity groups where the logical
volumes that are accessible from the hosts in the host group belong
Total LDEV Capacity (MB) Total capacity of the logical volumes accessible from the hosts in the host
group. This is the total capacity of LDEVs referred to in "Number of LDEVs".
Port Security Security of the port
Authentication : Method iSCSI target method authentication settings
■
CHAP
■
None
■
Comply with Host Setting
Authentication : Mutual
CHAP
Enable or disable the iSCSI target mutual CHAP
■
Enabled
■
Disabled
Authentication : User
Name
Authenticated iSCSI target user name
Authentication : Number
of Users
The number of authenticated users registered in the iSCSI target
Host Mode Host mode of the host group
Host Mode Option Host mode option of the host group. Host mode options are separated by
semicolons (;) when more than one option is specied.
Number of Hosts The number of the hosts in the host group.
Hosts report
The following gure shows an example of a hosts report. The table following the gure
describes the items in the report. When a host is registered to more than one port, more
than one r
ecord shows information about the same host.
Hosts report
Appendix A: Examples of storage conguration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 210

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English