Procedure
1. Navigate to Home > SMU Administr
ation > Current User Password to display the
Current User Password page.
The following table describes the î ´elds on this page:
Field/Item Description
User Name Displays your user login name (cannot be changed).
Current
Passwor
d
Displays a series of dots representing the currently speciî ´ed
password (the actual password cannot be displayed).
New Password The new password. The password cannot exceed 256
characters.
Conî ´rm New
Password
The new password again. Must be exactly the same as what
you entered in the New Password î ´eld.
apply Saves the new password.
2. Enter your curr
ent password in the Current Password î ´eld.
If you have forgotten you password, contact a global administrator and ask them to
give you a new password. (Passwords are stored in an encrypted form, and are not
retrievable or visible by anyone. If a user forgets their password, they must be given
a new password, which they can then change.)
3. Enter your new password in the New Password î ´eld.
4. Enter the new password again in the Conî ´rm New Password î ´eld.
5. When î ´nished, click apply to save the new password.
Changing another user's password
A global administrator can change the password of any user. If the user is authenticated
through a RADIUS server, however, the password must be changed using the tools and
utilities of the RADIUS server.
â–
For HNAS servers, use NAS Manager or the SMU CLI to change the user password.
Changing another user's password
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 136
To Next Page
Loading...
Need help?
General
