Item Description
Pool Name
â–
For V-V
OLs of Dynamic Provisioning, the name of the pool related to the
logical volume is displayed
1
â–
If the logical volume attribute is Pool, the name of the pool where the
logical volume belongs is displayed
â–
When neither of the above are displayed, the pool name is blank
Pool ID The ID of the pool indicated by "Pool Name" A hyphen (-) displays for
volumes other than pool-V
OLs or V-VOLs
Current MPU The number of the MP unit that currently controls the logical volume
Setting MPU The number of the MP unit that you speciî ´ed to control the logical volume
Command Device:
Security
Indicates whether Security is speciî ´ed as the attribute for the command
device. A hyphen (-) displays when "Attribute" is not "CMDDEV".
Command Device:
User Authentication
Indicates whether User Authentication is speciî ´ed as the attribute for the
command device. A hyphen (-) displays when "Attribute" is not "CMDDEV".
Command Device:
Device Group Deî ´nition
Indicates whether Device Group Deî ´nition is speciî ´ed as the attribute for
the command device. A hyphen (-) displays when "Attribute" is not
"CMDDEV".
Encryption Indicates whether the parity group to which the LDEV belongs is encrypted.
â–
For internal volumes: Enabled (encrypted) or Disabled (not encrypted)
â–
For external volumes: blank
T10 PI Indicates the T10 PI attribute set for the LDEV.
â–
Enabled
â–
Disabled
â–
Blank if the emulation type is not OPEN-V
ALUA Mode Indicates whether the ALUA mode is enabled:
â–
Enabled: ALUA mode is enabled.
â–
Disabled: ALUA mode is disabled.
Notes:
1. A hyphen (-) displays if the LDEV is an external volume.
LUNs report
The following î ´gure shows an example of an LU path deî ´nitions report. A record is
cr
eated for each LU path. The table following the î ´gure describes the items in the report.
LUNs report
Appendix A: Examples of storage conî ´guration reports
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 213
To Next Page
Loading...
Need help?
General
