Hitachi VSP Gx00 series User Manual

Attribute Description
Required /
Optional Default value
auth.ldap.<server_
name>.dns_lookup
Information about whether to
sear
ch the LDAP server with
the information registered in
the SRV records in the DNS
server.
■
true: Searches with the
information registered in
the SRV records in the DNS
server
■
false: Searches with the
host name and port
number
When "host" and "port" are
specied, the LDAP server is
not searched with the
information registered in the
SRV records by specifying
"true".
Optional False
Notes:
1. The item can be omitted if true is specied for
"auth.ldap.<server_name>.dns_lookup".
2. If the specied value is not valid, the default value will be used.
3. To use symbols such as + ; , < = and >, enter a backslash (\) before each symbol.
When using multiple symbols, each symbol must have a backslash before it. For
example, to enter abc++ in the searchdn eld, use \+ instead of + as shown here:
abc\+\+
To enter \ , /, or ", enter a backslash and then enter the ASCII code in hex for the
following symbols:
■ Enter \5c for \
■ Enter \2f for /
■ Enter \22 for "
For example, to enter abc\ in the searchdn eld, enter abc\5c.
Creating a RADIUS configuration file
You can use a RADIUS server for authentication on your storage system.
To use a RADIUS server for authentication, create a conguration
le in UTF-8 encoding.
Include information about the authentication server as shown in the following example.
Any le name and extension is allowed. If an authorization server is not used, you do not
need to dene the items for it.
Creating a RADIUS conguration le
Chapter 4: User administration
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 120

Hitachi VSP Gx00 series Specifications

General

Brand	Hitachi
Model	VSP Gx00 series
Category	Storage
Language	English