Changing network permissions
This procedure explains how to block or allow HTTP blocking.
Procedure
1. In the maintenance utility, click Administration to expand the Administration
navigation pane.
2. Click Network Settings. The Network Settings window displays the current
network settings and permissions.
3. In the Network Settings window, click Set Up Network Permissions.
4. To enable HTTP blocking, click Enable. To disable HTTP blocking, click Disable.
5. Click Apply. The dialog box closes and returns you to the Network Settings
window.
Creating a login message
Before you begin
You must have the Storage Administrator (View & Modify) role to complete this
procedure.
Procedure
1. In the maintenance utility Menu navigation tree, click System Management.
2. Click Edit Login Message.
3. Enter a message to be displayed at the time of login. The message can contain up to
2,048 char
acters. A line break is counted as one character.
4. Click Apply to save the message and close the dialog box.
Forcing the system lock to release
When a user locks the system, other users cannot log in or access the system. This
feature can be used to ensure that no changes to the system can be made while
maintenance or upgrade procedures are in process.
Caution: Befor
e using this feature, ensure that releasing the system lock will
not cause system problems due to processes that are currently running.
Releasing the system lock can terminate a process before it completes and
possibly leave the system in an unknown state. Check with any users that are
Changing network permissions
Chapter 3: Conî ´guring the storage system
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 50
To Next Page
Loading...
Need help?
General
