The following table describes the î ´elds on this page:
Field/Item Description
Group Name Group name is the user-friendly name of an Active
Dir
ectory group existing on the Active Directory server.
The full distinguished name for a group can be viewed
by hovering the mouse over the group name. The sort
order of the table can be changed by clicking over a
column heading.
Group Access Level Shows the group access level. This deî ´nes the access
level given to Active Directory users who are members
of the group when they log onto the SMU. On an
external or virtual SMU, if the Group Access Level is
Global, then group members are given SMU CLI access.
SMU CLI access is not available on an embedded SMU or
a NAS module SMU.
This column also displays those Active Directory groups
assigned the read-only attribute. A read-only group has
permission to view most pages of the NAS Manager, but
they are not allowed to perform any actions that would
trigger a system or conî ´guration change.
Note: Read-only users can not access the
CLI, and a user with CLI access may not be
r
ead-only. If either of these options is
checked, the other one is disabled.
details Click the details button in the right-hand column to view
details of the associated group.
Check All Checks all boxes under Group Name.
Clear All Clears all checked boxes under Group Name.
Conî ´guring Active Directory groups
Chapter 5: Setting up security
System Administrator Guide for VSP Gx00 models and VSP Fx00 models 167
To Next Page
Loading...
Need help?
General
