Honda XR100R User Manual

FRONT WHEEl/BRAKE/SUSPENSION/ STEERING
ASSEMBLY
FOR K BOLT
DUST SEAL
FORK T USE
23 N'm r "( 'm :; ' $/ ° ",NO
@
FORK SPRING
7
STOPPER RING
/
...
OIL SEAL
--i
FOR K SLIDER
FOR K SOOT
PIS TON RfNG
L--J
CJ
\
FORK PISTON
OIL LOCK
PIECE
REBOUND SPR ING
Sefore
assembly. wash all pMts with a high flash or
non·flammable so l vent and wipe them dry_
I nstall the rebound spr ing and for k pist on i nto the
fork tube.
Install the oil lock piece to the end of the fork piston.
Install the fork tube into the fork slider.
HOld
the fork slider in a v is" with soft jaws or a shop
towel.
Ifthl8lork piston Apply a locking agent to the fork sock(!l bolt threads.
turns wilh 1M Install and tighTen the socket bolt with a new sea ling
socket 00/1 . tempo- washer into th e fork piston.
rarity iMlaff I~
lorl< sprilli) and TORQU E: 20 N·m (2.0 kgl ·m . 1. Ibl. ft )
fork bolt
11-18
~KTUaE
OIL LOCK PIECE
REBOUND SPRING
Ui13I3 FORK SOCKET BOLT {
!II!'J
... WASHER '
(.
-II

Honda XR100R Specifications

General

Brand	Honda
Model	XR100R
Category	Motorcycle
Language	English