458
Requesting a local certificate
1. From the navigation tree, select Certificate Management > Certificate.
2. Click Request Cert.
Figure 478 Requesting a certificate
3. Configure the parameters as described in Table 192.
Table 192 Configuration items
Item Descri
tion
Domain Name
Select the PKI domain for the certificate.
Password
Enter the password for certificate revocation.
Enable Offline
Mode
Select this box to request a certificate in offline mode, that is, by an out-of-band
means like FTP, disk, or email.
If you cannot request a certificate from the CA through the SCEP protocol, you can
enable the offline mode. In this case, after clicking Apply, the offline certificate
request information page appears, as shown in Figure 479. S
ubmit the information
to the CA to request a local certificate.
4. Click Apply.
If you request the certificate in online mode, the system displays "Certificate request has been
submitted." Click OK to confirm. If you request the certificate in offline mode, the system displays
the offline certificate request information. You can submit the information to the CA by an
out-of-band means.
Figure 479 Offline certificate request information
To Next Page
Loading...
Need help?
General
