HP MSR SERIES User Manual

816
Item Descri
p
tion
Route Selection
Priority
Set the priority of the call route. The smaller the value, the higher the priority.
VAD
The VAD discriminates between silence and speech on a voice connection according
to their energies. VAD reduces the bandwidth requirements of a voice connection by
not generating traffic during periods of silence in an active voice connection. Speech
signals are generated and transmitted only when an active voice segment is detected.
Researches show that VAD can save the transmission bandwidth by 50%.
• Enable.
• Disable.
By default, VAD is disabled.
Select the Route(s)
Select the boxes of desired call routes, and then click the Apply to Selected Route(s)
button to apply the above advanced settings to the selected call routes.
Line management
FXS line configuration
Select Voice Management > Advanced Configuration > Batch Configuration from the navigation tree,
and then click the FXS Line Configuration link in the Line Management area to access the FXS line
configuration page, as shown in Figure 851.
Figure 851 FXS line configuration page

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English