HP MSR SERIES User Manual

815
Item Descri
p
tion
NET Payload Type
Field
Configure the value of the NTE payload type for the NTE-compatible switching mode.
This option is configurable only when NTE Compatible G.711 A-law or NTE Compatible
G.711 -law is selected in the Codec Type and Switching Mode for SIP Modem
Pass-through list.
By default, the value of the NTE payload type is 100.
Select the Route(s)
Select the boxes of call routes, and then click the Apply to Selected Route(s) button to
apply the above fax and Modem settings to the selected call routes.
Advanced settings
Select Voice Management > Advanced Configuration > Batch Configuration from the navigation tree,
and then click the Advanced Settings link in the Call Route area to access the call route advanced settings
page, as shown in Figure 850.
Figure 850 Call route adv
anced settings page
Table 303 Configuration items
Item Descri
p
tion
Codecs and Priorities
Codec with the First Priority.
Codec with the Second Priority.
Codec with the Third Priority.
Codec with the Lowest Priority.
DTMF Transmission
Mode
Specify DTMF transmission mode:
• In-band Transmission.
• Out-of-band Transmission.
• RFC2833: Adopt DTMF named telephone event (NTE) transmission mode. When
you adopt this transmission mode, you can configure the payload type field in RTP
packets.
By default, the value of the NTE payload type field is 101.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English