HP MSR SERIES User Manual

473
c. Enter con as the IPsec connection name, select Ethernet0/2 as the gateway interface, enter
2.2.2.1 as the remote gateway IP address, select Certificate as the authentication method, and
select CN=router-b for the certificate, select Characteristics of Traffic as the selector type, enter
10.1.1.0/0.0.0.255 as the source IP address/wildcard, and enter 11.1.1.0/0.0.0.255 as the
destination IP address/wildcard.
d. Click Apply.
Configuration guidelines
When you configure PKI, follow these guidelines:
• Make sure the clocks of entities and the CA are synchronous. Otherwise, the validity period of
certificates will be abnormal.
• The Windows 2000 CA server has some restrictions on the data length of a certificate request. If the
PKI entity identity information in a certificate request goes beyond a certain limit, the server will not
respond to the certificate request.
• The SCEP plug-in is required when you use the Windows Server as the CA. In this case, specify RA
as the authority for certificate request when you configure the PKI domain.
• The SCEP plug-in is not required when you use the RSA Keon software as the CA. In this case,
specify CA as the authority for certificate request when you configure the PKI domain.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English