HP MSR SERIES User Manual

483
1. From the navigation tree, select System Management > Users.
2. Click the Super Password tab.
The super password configuration page appears.
3. Configure the super password as described in Table 195.
4. Cli
ck Apply.
Figure 511 Super password configuration page
Table 195 Configuration items
Item Descri
p
tion
Create/Remove
Set the operation type:
• Create—Configure or modify the super password.
• Remove—Remove the current super password.
Password Set the password for a user to switch to the management level.
Confirm Password
Enter the same password again. Otherwise, the system prompts that the two passwords
entered are not consistent when you apply the configuration.
Switching to the management level
This function enables a user to switch the current user level to the management level.
Before switching, make sure the super password is already configured. A user cannot switch to the
management level without a super password.
The access level switchover of a user is valid for the current login only. The access level configured for the
user is not changed. When the user re-logs in to the Web interface, the access level of the user is still the
original level.
To switch the user access level to the management level:
1. From the navigation tree, select System Management > Users.
2. Click the Switch to Management tab.
The access level switching page appears.
3. Enter the super password.
4. Click Login.

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English