HP MSR SERIES User Manual

575
Figure 596 Network diagram
Configuration procedure
Before performing the following configuration, make sure that Router A, Router B and Router C are
routable to each other.
1. Complete basic voice call configurations: complete basic voice call configurations on Router A,
Router B, and Router C.
2. Configure three-party conference.
# Enable call hold on Router A and Router C.
a. Select Voice Management > Local Number from the navigation tree, click the icon of the
local number to be configured to access the call services configuration page.
Figure 597 Configuring call hold
b. Select Enable for Call Hold.
c. Click Apply.
# Enable call hold and three-party conference on Router B.
d. Select Voice Management > Local Number from the navigation tree, click the icon of local
number 2000 in the local number list to access the call services configuration page.
1000
Eth1/0
10.1.1.1/24
3000
Router A
Eth1/0
20.1.1.2/24
2000
Eth1/0
10.1.1.2/24
Eth1/1
20.1.1.1/24
Router B Router C
Telephone B
Telephone C
Telephone A

HP MSR SERIES Specifications

General

Brand	HP
Model	MSR SERIES
Category	Network Router
Language	English