Setting up the printer driver
3
bizhub C250P (Phase 3) 3-35
Specifying the TCP/IP settings
First, assign the IP address from the machine’s control panel.
1 Press the [Menu/Select] key on this machine’s control panel, touch [+]
or [,] to display the Admin. Setting screen, and then touch [)].
2 Enter the administrator password, and then press the [Menu/Select]
key.
– To enter the password, touch [+] or [,] to select the desired value,
and then touch [*] [)] to enter the next digit.
3 Touch [+] or [,] to display the Network Setting screen, and then touch
[)].
4 Touch [+] or [,] to display the TCP/IP screen, and then touch [)].
To Next Page
Loading...
Need help?
General
