10
Additional settings
10-42 bizhub C250P (Phase 3)
Specifying Printer Driver Settings
The paper sizes to be printed are preregistered as Custom Size.
To specify printer driver settings
1 Click the Setup tab.
2 From the "Original Size" or "Output Size" drop-down lists, select
"Custom Size Settings".
The Custom Size Settings dialog box appears.
3 Specify settings for the following:
– List of Custom Sizes: Select the size for the custom size being set.
(Konica Minolta PCL driver only)
– Custom Size Name: Input the name of the custom size being
registered. (Konica Minolta PCL driver only)
– Size: Specify the width and length of the custom size according to
the selected measurement units.
4 Click the [OK] button.
5 When printing, select the Custom Size that was registered from the
"Original Size" and "Output Size" drop-down lists on the Setup tab.
2
Note
For the Konica Minolta PCL driver, the custom size settings can only be
specified from the printer driver setup dialog box, which can be displayed
from the Printers window (for Windows XP/Server 2003,Printers and
Faxes window).
To Next Page
Loading...
Need help?
General
