11
Appendix
11-8 bizhub C250P (Phase 3)
Finisher FS-603
* The number of pages that can be bound together differs depending on
the paper weight. If 64 g/m
2
paper is used, 6 to 15 pages can be bound
together. If 80 g/m
2
paper is used, 6 to 10 pages can be bound together.
Specifications
Exit trays Exit tray 1, exit tray 2
Settings Normal settings: "Group", "Sort", "Offset/Group", "Off-
set/Sort", "Offset/Staple", and "Saddle Staple"
Paper types Exit tray 1:
"Group/Sort" setting: Plain paper (60 to 90 g/m
2
), thick paper
1 (91 to 150 g/m
2
), thick paper 2 (151 to 209 g/m
2
), thick paper
3 (210 to 256 g/m
2
), envelopes, overhead projector transpar-
encies, label sheets
"Offset/Sort" setting, "Offset/Group" setting: Plain paper (60
to 90 g/m
2
)
Staple: Plain paper (60 to 90 g/m
2
)
Exit tray 2:
Plain paper (60 to 90 g/m
2
)
Paper sizes Exit tray 1:
"Group" setting: A3 w to B5 w/v, A3 Wide (12-1/4 × 18 w)
"Sort" setting: A3 w to A5 v
"Staple" setting: A3 w to B5 w/v
Exit tray 2: A3 w, B4 w, A4 w
Paper capacity Exit tray 1:
Plain paper (60 to 90 g/m
2
): 1,000 sheets of A4 w-size paper
or smaller, or 500 sheets of B4 w-size paper or larger
Thick paper 1 (91 to 150 g/m
2
), thick paper 2 (151 to 209
g/m
2
), thick paper 3 (210 to 256 g/m
2
), envelopes, overhead
projector transparencies, label sheets: 20 sheets
Exit tray 2:
10 copies (6 to 15 bound pages)*
20 copies (2 to 5 bound pages)
Amount of shift 20 mm
Staple settings Exit tray 1:
Paper sizes (no. of bound pages): A4 w/v,
B5 w/v (2 to 50 pages), A3 w, B4 w (2 to 25 pages)
Exit tray 2:
Paper sizes (no. of bound pages): A3 w, B4 w, A4 w (2 to 15
pages)
Power requirements Supplied from main unit
Power consumption Less than 65 W
Dimensions 601 mm (W) × 603 mm (D) × 933 mm (H)
Weight Approx. 42 kg (including the horizontal transport unit)
Consumables Staples MS-5D (5,000 staples for stapling 50 sheets) × 1
To Next Page
Loading...
Need help?
General
