6
Loading copy paper
6-22 bizhub C250P (Phase 3)
Loading paper into the bypass tray
Paper can be fed manually through the bypass tray if you wish to print onto
paper that is not loaded into a paper tray, or if you wish to print onto thick
paper, postcards, envelopes, overhead projector transparencies or label
sheets.
To load paper (bypass tray)
1 Open the bypass tray.
– When loading large-sized paper,
pull out the tray extension.
2 With the side to be printed on facing down, insert the paper as much
as possible into the feed slot.
?
What should be done if the paper is curled?
% Flatten the paper before loading it.
3 Slide the lateral guides to fit the size
of paper being loaded.
– If envelopes are loaded, continue
with step 4.
4 Pull up the upper right-side door
release lever, and then open the
upper right-side door.
Tray extension
Lateral guides
To Next Page
Loading...
Need help?
General
