Control panel settings
5
bizhub C250P (Phase 3) 5-35
Tray Setting
Output Setting
!
Detail
[Bin setting] appears if the optional mailbin kit is installed.
Parameters Description Initial Setting
Auto Tray Select Specify the paper trays that are selected
when the paper tray is automatically
changed.
T1, T2, T3, T4, BP
Tray Priority Specify the priority for selecting the paper
trays when the automatic paper-tray-switch-
ing operation is performed.
T1, T2, T3, T4, BP
Auto Tray Select Select whether or not a paper tray loaded
with paper of the same size is selected auto-
matically when the paper tray becomes emp-
ty.
Permit
No Match. Paper Select the operation that is performed when
there is no paper of the corresponding size in
the specified paper tray.
• Stop Printing: The machine stops operat-
ing.
• Switch Trays: The specified paper trays
are selected in the specified order of prior-
ity and, when the tray runs out of paper,
the next paper tray is selected.
Stop Printing
Parameters Description Initial Setting
Print Output Select whether the machine waits until the
first page of a print job is received before
starting to print or whether the machine waits
until all data is received before starting to
print.
Page Print
Exit Tray Set Specify the priority for using the output trays
of the finisher.
Main Tray
Offset Setting Select whether or not printed papers are fed
out shifted when "Offset" is selected while a
finisher is installed.
• [ON]: Pages are fed out shifted.
• [OFF]: Pages are fed out without being
shifted.
ON
Bin Setting The output tray 1 can be specified as mailbin
5 and the optional output tray can be speci-
fied as mailbin 6.
Disable
To Next Page
Loading...
Need help?
General
