4
Specifying printer driver settings
4-106 bizhub C250P (Phase 3)
Printer-specific options (Finishing Options 1 to 4)
You can specify printer-specific options. You can specify this option when
using the staple or hole punch functions of this machine.
1 From the "File" menu, select "Print".
2 Select "Finishing Options 1 to 4".
3 Specify settings for the following:
ā Offset: Select if offset printing is performed.
ā Output Tray: Select the exit tray.
ā Binding Position: Select the binding position.
ā Duplex: Select if double-sided printing is performed.
ā Combination: Select if booklet printing is performed.
ā Staple: Select if stapling is performed.
ā Punch: Select if hole punching is performed.
ā Fold: Select if folding is performed.
ā Center Erase: Does not print on the folded part of the center
binding.
ā Front Cover Page: Select if a front cover page is to be attached.
ā Paper Tray (Front Cover Page): Select the paper tray for the front
cover.
ā Back Cover Page: Select if a back cover page is to be attached.
ā Paper Tray (Back Cover Page): Select the paper tray for the back
cover.
ā Transparency Interleave: Select if interleaves are to be inserted
between overhead projector transparencies.
ā Paper Tray (Transparency Interleave): Select the paper tray for the
transparency interleaves.
ā Wait Mode: Select if printing is temporarily stopped after part of the
document has been printed so that the proof print can be checked.
ā Resolution: Select the resolution.
ā Select Color: Select whether to print in color or grayscale.
ā Original Image Type: Select the quality suitable for the original
document.
ā Color Matching (Text): Adjust the color quality of the text in a
document.
ā Pure Black (Text): Select whether to print the text in a document in
grayscale.
ā Screen (Text): Select if screening of the text in a document is
performed.
ā Color Matching (Photo): Adjust the color quality of photos in a
document.
ā Pure Black (Photo): Select whether to print the photos in a
document in grayscale.