Specifying printer driver settings
4
bizhub C250P (Phase 3) 4-127
Finishing
You can specify the various finishing functions of this machine, such as
stapling and hole punching.
1 From the "File" menu, select "Print".
2 Select "Finishing".
3 Specify settings for the following:
– Collate: Select this check box to print multiple copies in sets.
– Offset: Select this check box to specify offset printing.
– Duplex: Select this check box to specify double-sided printing.
– Output Tray: Select the exit tray.
– Binding Position: Select the binding position.
– Combination: Select if booklet printing is performed.
– Staple: Select if stapling is performed.
– Hole-Punch: Select if hole punching is performed.
– Fold: Select if folding is performed.
– Center Erase: Does not print on the folded part of the center
binding.
To Next Page
Loading...
Need help?
General
