4
Specifying printer driver settings
4-4 bizhub C250P (Phase 3)
To display the printer driver setup dialog box
1 For Windows 98SE/Me/2000/NT 4.0, click the [Start] button, point to
"Settings", and then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
– If "Printers and Faxes" does not appear in the Start menu, open the
Control Panel from the Start menu, select "Printers and Other
Hardware", and then select "Printers and Faxes".
2 For Windows 98SE/Me, right-click the icon of the installed printer, and
then click "Properties".
For Windows 2000/XP/Server 2003, right-click the icon of the installed
printer, and then click "Printing Preferences".
For Windows NT 4.0, right-click the icon of the installed printer, and
then click "Document Default".
For the settings that can be specified with each printer driver, refer to the
following:
- Konica Minolta PCL Driver: "Setting up the PCL driver" on page 4-6
- Konica Minolta PostScript Driver: "Setting up the PostScript driver
(Windows)" on page 4-49
- PostScript PPD Driver: "Setting up the PPD driver (Windows)" on
page 4-85
For details on saving settings, refer to the following pages.
Konica Minolta PCL driver: "Saving the driver settings" on page 4-46
Konica Minolta PostScript driver: "Saving the driver settings" on page 4-82
To specify custom settings, click "Print" in the application, and then click the
[Preferences] button on the Print dialog box. The settings specified on the
Print dialog box apply only to the current file.
To Next Page
Loading...
Need help?
General
