Setting up the printer driver
3
bizhub C250P (Phase 3) 3-55
For print server mode with NetWare 4.x Bindery Emulation
Before using bindery emulation, check that bindery emulation is compatible
with the NetWare server.
1 From a client computer, log on with Supervisor permissions to access
the NetWare server where Pserver is registered.
2 Start up Pconsole.
3 From the "Available Options" list, select "Quick Setup", and then click
the [Enter] button.
4 Enter the appropriate names in the "Printer Server Name", "Printer
Name", "Print Queue Name", and "Print Queue Volume" fields, select
"Other/Unknown" from the "Printer type" field, and then save the
specified settings.
5 Click the [Esc] button to quit Pconsole.
To Next Page
Loading...
Need help?
General
