3
Setting up the printer driver
3-68 bizhub C250P (Phase 3)
Specifying Macintosh settings
Use the Macintosh computer that is connected to specify the TCP/IP and
AppleTalk settings.
2
Reminder
For network settings, consult the network administrator.
For printer driver installation, refer to "Installing the printer driver" on
page 3-20.
Since Bonjour (a Mac OS X 10.4 function) is always enabled, it is not
required to change the settings. Bonjour/Rendezvous is a Mac OS X
function. For Mac OS 9.2, connect using AppleTalk.
For Mac OS X
1 On the Apple menu, select "System Preferences".
2 Click the "Network" icon.
3 From "Show", select "Built-in Ethernet".
4 Click the TCP/IP tab.
5 Select the items from "Configure" that correspond to the network
settings for the Macintosh computer that is connected to the network,
and then set the IP address and subnet mask.
6 If using an AppleTalk connection, click the AppleTalk tab, and then
check that the "Make AppleTalk Active" check box is selected.
7 Click the close button in the upper-left corner of the dialog box.
The "Apply configuration changes?" message appears.
8 Click the [Apply] button.
The changed settings are saved.
To Next Page
Loading...
Need help?
General
