Loading copy paper
6
bizhub C250P (Phase 3) 6-9
Print area
Any part of the image within the area indicated below is not copied.
- A margin 4.2 mm from the leading edge of the paper (A)
- A margin 4.2 mm from the trailing edge of the paper (B)
- A margin 4.2 mm on both sides of the paper (C)
Auto tray switch feature
If the selected paper tray runs out of paper while a job is being printed and a
different paper tray is loaded with paper meeting the following conditions,
the other paper tray is automatically selected so printing can continue. If the
optional LCT is installed, a maximum of 3,400 pages (with A4 v paper) can
be made continuously. (The paper tray is automatically switched only if the
"Auto Tray Switch ON/OFF" parameter in the Utility mode is set to "Allow".)
Operating conditions
- The paper is the same size.
- The paper is positioned in the same orientation.
- The paper is the same type.
- Paper trays that are selected when the paper tray is automatically
switched.
!
Detail
For details on the specifying the paper trays that are selected when the
paper tray is automatically switched, refer to "User Setting" on
page 5-34.
A: 4.2 mm
B: 4.2 mm
C: 4.2 mm
To Next Page
Loading...
Need help?
General
