Setting up the printer driver
3
bizhub C250P (Phase 3) 3-45
Printer driver settings (Windows 2000/XP/server 2003)
When using Port 9100 to print, change the printer driver port to "9100".
1 For Windows 2000, click the [Start] button, point to "Settings", and
then click "Printers".
For Windows XP/Server 2003, click the [Start] button, and then click
"Printers and Faxes".
– If "Printers and Faxes" is not displayed in the Start menu, click
"Control Panel" in the Start menu, double-click "Printers and Other
Hardware", and then double-click "Printers and Faxes".
2 Right-click the icon of the installed printer, and then click "Properties".
3 On the Ports tab, click the [Add Port] button.
4 In the "Available Printer Ports" list, select "Standard TCP/IP Port", and
then click the [New Port] button.
5 When the Add Standard TCP/IP Printer Port Wizard starts up, click the
[Next] button.
6 In the "Name of printer or IP address" box, enter the IP address for this
machine, and then click the [Next] button.
7 Select "Custom", and then click the [Settings] button.
8 Click [RAW], and then enter the RAW port number (the default setting
is "9100") in the Port Number box.
9 Click the [Next] button, and then click the [Finish] button to apply the
setting.
2
Note
If the RAW port is not specified to be used in the TCP/IP setting, printing
cannot performed.
To Next Page
Loading...
Need help?
General
