3
Setting up the printer driver
3-8 bizhub C250P (Phase 3)
Installing the printer driver using the Add Printer Wizard
2
Note
For IPP printing, it is not necessary to install the printer driver at this time
since IPP printing setup is performed when the printer driver is installed.
For further details on IPP printing, refer to "IPP printing (Windows
2000/XP/Server 2003)" on page 3-48.
2
Note
For details on installing the printer driver in a network environment, refer
to "Setting up network printing" on page 3-29. Because it is necessary to
specify other network settings in advance when installing the printer
driver using a network connection, install it using a local connection at
this time.
For Windows XP/Server 2003
1 Insert the Windows printer driver CD-ROM into the computer’s CD-
ROM drive.
– Konica Minolta PCL driver: User Software CD-ROM
– Konica Minolta PostScript driver: PostScript Printer Driver CD-
ROM
2 Click the [Start] button, and then click "Printers and Faxes".
– If "Printers and Faxes" is not displayed in the Start menu, click
"Control Panel" in the Start menu, double-click "Printers and Other
Hardware", and then double-click "Printers and Faxes".
3 For Windows XP, click "Add a printer" on the "Printer Tasks" menu.
– For Windows Server 2003, double-click the "Add Printer" icon.
The Add Printer Wizard starts up.
4 Click the [Next] button.
5 Select "Local printer attached to this computer", and then click the
[Next] button.
– Clear the "Automatically detect and install my Plug and Play
printer" check box.
To Next Page
Loading...
Need help?
General
