Troubleshooting
9
bizhub C250P (Phase 3) 9-39
9.3 When the message “Replenish paper” appears
If a tray has run out of paper while printing, the message "Replenish paper."
appears.
To replenish paper
% Check which paper tray is indicated, and then load it with paper.
xx: Indicates the paper tray
sssss: Indicates the size of the paper
ttttt: Indicates the code for the paper type
NRML (plain paper), 1SIDE (paper only for single-sided printing), OHP,
TH1 to TH3 (thick paper 1 to 3), CP (colored paper), LTHD (letterhead),
ENV (envelopes), and SP (special paper).
!
Detail
For details on loading paper into the paper trays, refer to "Loading paper
into the Tray 1" on page 6-11, "Loading paper into Tray 2, 3, or 4" on
page 6-16, "Loading paper into the LCT" on page 6-19, and "Loading
paper into the bypass tray" on page 6-22.
To Next Page
Loading...
Need help?
General
