Loading copy paper
6
bizhub C250P (Phase 3) 6-31
Punching holes in prints (Punch settings)
!
Detail
In order for holes to be punched in the prints, all of the following
conditions must be met.
The paper width must be between 280 mm and 297 mm.
The paper length must be between 182 mm and 432 mm.
2
Note
The hole punch function is available only when optional finisher FS-603
and punch kit PK-501 are installed or when optional finisher FS-514 and
punch kit PK-510 are installed.
Paper Weight Paper Size
60 g/m
2
to 209 g/m
2
A3 w, A4 v
To Next Page
Loading...
Need help?
General
