Appendix
11
bizhub C250P (Phase 3) 11-3
11 Appendix
11.1 Specifications
bizhub C250P
Specifications
Type Freestanding printer
Photoconductor OPC
Developing system HMT developing method (HMT-OR)
Fusing system Roller fixing
Paper Plain paper (60 to 90 g/m
2
), thick paper 1 (91 to 150 g/m
2
),
thick paper 2 (151 to 209 g/m
2
),
thick paper 3 (210 to 256 g/m
2
),
overhead projector transparencies*,
letterheads, colored paper, envelopes*, label sheets*,
banner paper (127 to 160 g/m
2
)**,
* Can only be fed through the Tray 1 or the bypass tray
** Can only be fed through the bypass tray
Print sizes Tray 1:
A3 w to B6 w, A6 w, A3 Wide (12-1/4 × 18 w), 11 × 17 w to
5-1/2 × 8-1/2 w/v, 8 × 13 w
*1
Width: 90 to 311.1 mm; Length: 139.7 to 457.2 mm
Tray 2:
A3 w to A5 w, 11 × 17 w to 8-1/2 × 11 w/v
Bypass tray:
A3 w to B6 w, A6 w, A3 Wide (12-1/4 × 18 w), 11 × 17 w to
5-1/2 × 8-1/2 w/v, 8 × 13 w
*1
, Banner paper
Width: 90 to 311.1 mm; Length: 139.7 to 457.2 mm
Banner paper: Width: 210 to 297 mm; Length: 457.3 to 1200
mm
Paper tray capacity Tray 1:
Plain paper: 250 sheets
Thick paper 1/2/3, overhead projector transparencies,
label sheets, envelopes: 20 sheets or less
Tray 2:
Plain paper: 500 sheets
Bypass tray:
Plain paper: 100 sheets
Thick paper 1/2/3, overhead projector transparencies,
label sheets envelopes: 10 sheets or less
Print exit tray capacity Plain paper: 350 sheets; Thick paper: 20 sheets; Overhead
projector transparencies: 1 sheet
Warm-up time Less than 110 seconds (at room temperature (23°C))
Image loss width Leading edge: 4.2 mm; Trailing edge: 4.2 mm;
Rear edge: 4.2 mm; Front edge: 4.2 mm
RAM 512 MB
To Next Page
Loading...
Need help?
General
