Lantronix SGX 5150 User Manual

9: Administration
SGX 5150 IoT Device Gateway User Guide 110
TM
6. Identify the New Certificate Type selected.
 If you select SSL authority, RSA, or DSA certificates, select PEM or PKCS7.
 If the Web Manager determines that the certificate is an Authority Certificate type, the New
Certificate Type field updates to PKCS12 automatically. For PKCS12 certificates, enter a
password.
Note: Ensure that the certificate is formatted properly with a valid open and close tag.
Also ensure that the Private Key is associated to the selected certificate and that it is
formatted properly with a valid open and close tag.
7. To locate the associated valid New Private Key for this certificate, click Browse... to browse
to and select the file.
8. Select the New Key Type from the drop-down menu.
9. Click Submit.
To Configure an SSL Credential to Use a Self-Signed Certificate
1. In the Web Manager, click the Administration tab.
2. Click SSL.
3. Click Credentials.
4. Under View or Edit, click the credential you wish to modify to access the information page for
that credential.
5. Enter the details for a new self-signed certificate for this credential. Reference Table 9-42 SSL
Credential - Create New Self-Signed Certificate on page 109.
6. Click Submit. The process to create a self-signed certificate can take up to 30 seconds,
depending on the length of the key.
Trusted Authorities
One or more authority certificates are used to verify the identity of a peer. Authority certificates are
used with some wireless authentication methods. These certificates do not require a private key.
Table 9-43 SSL Trusted Authority
Trusted Authorities
Settings
Description
Authority Click the Browse... button to browse to an existing SSL authority certificate.
RSA or DSA certificates are allowed.
The format of the authority certificate can be PEM or PKCS7. PEM files must
start with “-----BEGIN CERTIFICATE-----” and end with “-----END
CERTIFICATE-----”. Some certificate authorities add comments before and/or
after these lines. Those comments must be deleted before upload.
New Certificate Type Select the certificate type through the drop-down window.
This field may automatically update, depending upon extension of the certificate
entered.
Delete All To delete all existing certificate authorities as listed, click the Delete ALL button.
Delete To delete an existing certificate authority, click the Delete button beside the
specific authority listed under Current Certificate Authorities.

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm