Lantronix SGX 5150 User Manual

9: Administration
SGX 5150 IoT Device Gateway User Guide 79
TM
 NppFTP: http://sourceforge.net/projects/nppftp/
This plugin provides a one-click upload of a file to an FTP server. Debugging and testing on
the SGX 5150 easier because SGX 5150 products have an FTP server through which to
upload files into the file system.
Applications
The SGX 5150 supports the ability to install and uninstall user-defined Python scripts and
packages and will include the following:
Table 9-2 contains the setting options for configuring, installing, uninstalling and running external
applications via Python scripts.
Caution: Use extreme caution when installing and running scripts.
Table 9-2 Script Settings
bin python
lib
libpython{version}.so
<ltrx python sdk>
libpython{version}
"python precompiled scripts
"python shared libraries
Script Settings Description
Reserved Start Port Enter the Reserved Start Port. The range is between 1024 and 65535.
Reserved Ports Enter a Reserved Port. The range is between 2 and 32.
Script (Number) Click the Run button to manually execute the script.
Note: The script is run with configuration saved to the Flash.
Enabled
(checkbox)
Check the Enabled checkbox within a particular script to enable it. Uncheck the
checkbox to disable the script.
Run on startup
(checkbox)
Check the Run on startup checkbox within a particular script to have it run upon the
start up of the SGX 5150 unit. Uncheck the checkbox to disable automatically
running the unit upon startup.
Run on shutdown
(checkbox)
Check the Run on shutdown checkbox within a particular script to have it run on
shutdown of the SGX 5150 unit. Uncheck the checkbox to disable automatically
running the script upon shutdown.
Script Enter the path of the script to run.
Parameter Enter the script parameters (if any).
Output Enter output log file (if desired) for the script to redirect output of script to file. If the
name of output log contains "
%t", it will translate it into time stamp (e.g.,
script1_%t.log => script1_2007-01-02_19-06-57.log)
Uninstall (button) Click the Uninstall button in a Python package to uninstall it.
Remove All
(button)
Click the Remove All button to uninstall all Python packages.
Filename (field) Enter the package file name pathway in the file system and click the Install button to
install it.

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm