9: Administration
SGX 5150 IoT Device Gateway User Guide 87
To Configure Gateway Port Forwarding Settings
Using Web Manager
To modify gateway port forwarding information, on the Administration page, click Gateway >
Configuration > Port Forwarding.
Using the CLI
To enter the gateway command level: enable > config > gateway > port
forwarding rule <number>
Using XML
Include in your file: <configgroup name="gateway"> <configitem name="port
forwarding" instance="<number>">
Static Routes
Allows the user to add routes to the SGX 5150 gateway routing table.
Table 9-12 Static Route Setting Routes
Table 9-13 Adding a New Static Route
To Configure Gateway Static Route Settings
Using Web Manager
To modify gateway static route information, on the Administration page, click Gateway >
Configuration > Static Routes.
Static Route Settings Description
Enabled Enables the static route
Delete Deletes the static route
Name User friendly name for the route. Click on the [Edit] icon to make changes.
Route Network or Host for the route
Applied If the route was successfully applied. Routing table updates require a
reboot and route needs to be valid as per other device configurables.
Adding New Static Route
Settings
Description
Name User friendly name for the route
Network Network or Host for the route
Gateway Gateway for the route
Interface Interface for the route
Metric Priority for the route. Lower metric means higher priority
To Next Page
Loading...
Need help?
General
Weight and Dimensions
