9: Administration
SGX 5150 IoT Device Gateway User Guide 81
To View and Configure Basic CLI Settings
Using Web Manager
To view CLI statistics, on the Administration page, click CLI > Statistics.
To configure basic CLI settings, on the Administration page, click CLI > Configuration.
Using the CLI
To enter CLI command level: enable > config > cli
Using XML
Include in your file: <configgroup name="cli">
Clock
You can view current clock settings at the bottom of the screen, and also either manually update or
synchronize the clock with an SNTP server. If you select SNTP, you can choose automatic time
zone detection.
Table 9-4 Clock Settings
SSH Port Specify the SSH Port and override the default, as needed. Blank the field to
restore the default.
SSH Max Sessions Specify the maximum number of concurrent SSH sessions that will be allowed.
Bridge Fields Description
Method Select Manual or SNTP from the drop-down window.
Date If Manual method is selected, enter the date using the Year, Month and
Day drop down menus that become available.
Time If Manual method is selected, enter the time using the Hour, Minute (Min)
and Second (Sec) drop down menus that become available.
NTP Server If SNTP method is selected, the clock will keep time synchronized with the
NTP Server by default. Enter an alternative NTP server if you wish to use an
address other than the default.
Time Zone Select the desired Time Zone from the drop-down menu based on geographic
location. The time zones listed are in Universal Time Coordinated (UTC),
formerly known as Greenwich Mean Time (GMT). Syslog and other
applications may use UTC. The UTC Offset of the form HHMM (H = hour, M =
minute) is applied to the UTC time to get the local time. The SGX 5150
gateway will make seasonal time changes required for Daylight Savings
Time.
Command Line
Interface Configuration
Settings
Description
To Next Page
Loading...
Need help?
General
Weight and Dimensions
