Lantronix SGX 5150 User Manual

9: Administration
SGX 5150 IoT Device Gateway User Guide 88
TM
Using the CLI
 To enter the gateway command level: enable > config > gateway > static route
<number>
Using XML
 Include in your file: <configgroup name ="gateway"> <configitem name="static
routes" instance="<number>"
DHCP Server
Allows the user to configure the SGX 5150 gateway as a DHCP server.
Table 9-14 DHCP Settings
To Configure Gateway DHCP Server Settings
Using Web Manager
 To modify gateway DHCP server or static lease information, on the Administration page,
click Gateway > Configuration > DHCP Server.
Using the CLI
 To enter the gateway command level: enable > config > gateway > dhcp server
DHCP Settings Description
Configuration
Lease time Duration for which lease is initially assigned. Clients must renew after this duration.
DHCP Settings
State Enable or Disable the DHCP server for the DHCP settings.
 Enabled: DHCP server is enabled
 Disabled: DHCP server is disabled.
Start IP Address Start IP Address of address pool.
End IP Address End IP Address of address pool.
Lease time Duration for which lease is initially assigned. Clients must renew after this duration.
DHCP Settings
State Enable or Disable the DHCP server for the DHCPv6 settings.
 Enabled: DHCP server is enabled
 Disabled: DHCP server is disabled.
Start IP Address Start IPv6 Address of address pool
End IP Address End IPv6 Address of address pool
DHCP v6 Settings
State Enable or Disable the DHCP server for the DHCPv6 settings.
 Enabled: DHCP server is enabled
 Disabled: DHCP server is disabled.
Start IPv6 Address Start IPv6 Address of address pool
End IPv6 Address End IPv6 Address of address pool

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm