4: Using DeviceInstaller
SGX 5150 IoT Device Gateway User Guide 33
Table 4-1 SGX 5150 Configuration in DeviceInstaller
Current Settings Description
Name
Configurable field. A name that identifies the SGX 5150 unit. The name field is
blank by default. Double-click the field, type in the value, and press Enter to
complete. This name is not visible on other PCs or laptops using
DeviceInstaller.
DHCP Device Name Non-configurable field. Displays the name associated with SGX 5150 unit’s
current IP address, if the IP address was obtained dynamically.
To change the DHCP device name, see Chapter 5: Configuration Using Web
Manager or see the SGX 5150 IoT Device Gateway Command Reference
available at www.lantronix.com/support/documentation
.
Group
Configurable field. A group name to categorize the SGX 5150 unit. Double-
click the field, type in the value, and press Enter to complete. This group
name is not visible on other PCs or laptops using DeviceInstaller.
Comments Configurable field. Information about the SGX 5150 unit. Double-click the field,
type in the value, and press Enter to complete. This description or comment is
not visible on other PCs or laptops using DeviceInstaller.
Device Family Non-configurable field. Displays the SGX 5150 units device family as “SGX.”
Short Name Shows “sgx5150” by default.
Long Name Shows “Lantronix SGX5150” by default.
Type Non-configurable field. Displays the device type as “SGX 5150.”
ID Non-configurable field. Displays the SGX 5150 unit’s ID embedded within th
e
unit.
Hardware Address Non-configurable field. Displays the SGX 5150 unit’s hardware (or MAC)
address.
Firmware Version Non-configurable field. Displays the firmware currently installed on the SGX
5150 unit.
Extended Firmware
Version
Non-configurable field. Displays the full version nomenclature of the firmware.
Online Status Non-configurable field. Displays the SGX 5150 unit’s status as Online, Offline,
Unreachable (if the unit is on a different subnet), or Busy (the SGX 5150 unit is
currently performing a task.)
IP Address Non-configurable field. Displays the SGX 5150 unit’s current IP address. To
change the IP address, click the Assign IP button on the DeviceInstaller menu
bar.
IPV6 Link Local Address Non-configurable field. Displays the SGX 5150 unit’s current IPv6 address. To
change the IPv6 address, click the Assign IP button on the DeviceInstaller
menu bar.
IPV6 Global Address Non-configurable field. Displays the SGX 5150 unit’s global address.
IP Address was
Obtained
Non-configurable field. Displays “Dynamically” if the SGX 5150 unit
automatically received an IP address (e.g., from DHCP). Displays “Statically” if
the IP address was configured manually. If the IP address was assigned
dynamically, the following fields appear:
Obtain with DHCP with value of True or False
Obtain with BOOTP with value of True or False
Subnet Mask Non-configurable field. Displays the SGX 5150 unit’s current subnet mask. To
change the subnet mask, click the Assign IP button on the DeviceInstaller
menu bar.