SGX 5150 IoT Device Gateway User Guide 17
2: Introduction
The SGX 5150 is a turnkey WLAN IoT device gateway that securely connects deployed devices to
the enterprise network through serial, USB or Ethernet interfaces. It simplifies enterprise Wi-Fi®
deployments and accelerates the availability of connected devices within enterprise, medical/
healthcare and industrial automation applications.
Note: This user guide describes all software features supported in the Lantronix SGX
5150 device gateway models available for purchase. Depending on the specific SGX 5150
device gateway model you have purchased, some descriptions may not apply.
Key Features
Power Supply: Flexible power options and input voltage range (one barrel connector for 9-30
VDC power source, USB type C VBUS 5V, and optional PoE power input via Ethernet RJ45
interface
Controller: 32-bit ARM9 microprocessor running at 400 megahertz (Mhz) with 32 Kilobyte
(KB) configurable cache
Memory: 400 MHz ARM9, 64 MB SDRAM and 128 MB NAND flash
Ethernet:
- One RJ45 10Base-T/100Base-TX Ethernet port
- Auto sensing
- Automatic MDI/MDI-X crossover
- Full duplex IEEE 802.3x flow control
- Half-duplex back pressure flow control
- Hardware Optional PoE Power Input (Class 2)
Supports inputs at both Spare Pins or Ethernet Center Taps
Wireless:
- 5G Wi-Fi (IEEE 802.11ac)
• 1x1 ac (MCS0 - MCS9)
• 20, 40 and 80 MHz Channels with optional SGI
- IEEE 802.11 n
• 1x1 n (MCS0 - MCS7)
• 20 MHz and 40 MHz channel width with optional SGI
- Advanced 802.11 n/ac Features
• Tx/Rx Low Density Party Check (LDPC)
• Rx Space Time Block Coding (STBC)
- Compatible with IEEE 802.11 a/b/g and supports IEEE 802.11 d/h
- Bluetooth/WLAN Coexistence
- Dual band 2.4 GHz and 5 GHz
To Next Page
Loading...
Need help?
General
Weight and Dimensions
