Lantronix SGX 5150 User Manual

9: Administration
SGX 5150 IoT Device Gateway User Guide 130
TM
To Configure User Management
Using Web Manager
 To configure usb command mode, on the Administration page, click User Administration.
Using the CLI
 To enter the User Management command level: enable > config > user management
Using XML
Include in your file: <configgroup name="user management">
XML
This page is used to clone the current system configuration. The generated file can be imported at
a later time to restore the configuration.
Caution: The 'User Management', 'WLAN Profile', 'HTTP Authentication', Access
Point, and SSL groups must be imported with secrets manually filled in
(e.g., passwords and private key) before import.
The exported file can be modified and imported to update the configuration on this SGX 5150
gateway or another.
XML records can also be exported to browser window or to a download link on the SGX 5150
gateway.
Notice that by default, all Groups to Export are checked except some pertaining to the network
configuration; this is so that if you later 'paste' the entire clone configuration, it will not break your
network connectivity. You may check or uncheck any group to include or omit that group from
export.
Configuration
Groups
Check the Configuration Groups the new role will have access to configuring, if any:
Add Click Add to submit the new role. Click OK in the confirmation window which
appears to add the role.
New Role Settings Description
 access point
 action
 application
 arp
 bridge
 cli
 clock
 device
 dhcp server
 diagnostics
 discovery
 email
 ethernet
 filesystem
 ftp server
 gateway
 gre
 host
 http authentication uri
 http server
 icmp
 input filters
 interface
 ip
 line
 mach10
 mach10 line
 modbus
 network failover
 qos
 reboot schedule
 routing protocols
 rss
 serial command mode
 smtp
 snmp

 ssh
 ssh client
 ssh server
 ssl
 syslog
 telnet
 terminal
 tunnel accept
 tunnel connect
 tunnel disconnect
 tunnel modem
 tunnel packing
 tunnel serial
 user management
 virtual ip
 vpn
 wlan profile
 wlan

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm