Lantronix SGX 5150 User Manual

5: Configuration Using Web Manager
SGX 5150 IoT Device Gateway User Guide 39
TM
Navigating Web Manager
The table below provides a shortcut to the various software features available for viewing and
configuration through Web Manager.
Table 5-5 Web Manager Pages
Web Manager Page Description Page
Status Shows product information, network, line, and tunneling settings. 36
Access Point Allows you to configure an access point and shows the current operational
state of existing access points.
36
Action Allows you to view and configure the actions for a specific alarm or report. 77
Applications View and configure application running scripts. 79
Bridge Allows you to configure a bridge and shows the current operational state of
the bridge.
42
CLI Shows Command Line Interface (CLI) statistics and lets you change the
current CLI configuration settings.
80
Clock Allows you to view and configure the current date, time and time zone as it
displays in web manager.
81
Diagnostics Lets you perform various diagnostic procedures. 71
Discovery Allows you to view and modify the configuration and statistics for device
discovery.
82
DNS Displays the current status of the DNS subsystem. 71
Email Shows email statistics and lets you clear the email log, configure email
settings, and send an email.
83
Filesystem Shows file system statistics and lets you browse the file system to view a
file, create a file or directory, upload files using HTTP, copy a file, move a
file, or perform TFTP actions.
69
FTP Shows statistics and lets you change the current configuration for the File
Transfer Protocol (FTP) server.
84
Gateway Shows statistics and lets you change the current configuration for the
gateway.
84
GRE Allows you to view and configure GRE settings. 91
Hardware Shows hardware status and configuration options. 72
HTTP Shows Hyper Text Transfer Protocol (HTTP) statistics and lets you change
the current configuration and authentication settings.
93
IP Sockets Shows IP socket status and lets you change hardware configuration. 72
Line Shows statistics and lets you change the current configuration and
Command mode settings of a serial line.
95
Log Shows and allows changes with logs. 73
MACH10 Shows the configuration and status for the MACH10 client. 97
Memory Shows memory status and lets you change hardware configuration. 73
Modbus Shows the current connection status of the Modubs servers listening on
the TCP ports and configure Modbus TCP server.
100
Network Shows status and lets you configure the network interface. 41
Ping
Shows how to ping a network host with a DNS hostname or IP address. 73

Lantronix SGX 5150 Specifications

General

Certification	FCC ICES-003:2012 RED 2014/53/EU, EMCD 2014/30/EU, EN 300 328 V1.9.1, EN 301 489-1 V1.9.2, EN301 489-17 V2.2.1, EN 301 893 V1.8.1, EN 62311: 2008 AS/NZS CISPR 22, AS/NZS 4268: A1: 2013, AS/NZS 2772.2VCCI EN 55022:2010, EN 55024:2010, EN 61000-3-2:A2 2009, EN 61000-3-3: 2008 UL 60950/CSA 22.2 No. 60950, IEC 60950 CE LVD 2014/35/EU
LED indicators	Yes
Power requirements	9 - 30 VDC
Power over Ethernet (PoE)	No
Power consumption (typical)	1.9 W
Storage temperature (T-T)	-40 - 85 °C
Operating temperature (T-T)	-40 - 70 °C
Operating relative humidity (H-H)	5 - 95 %
Security algorithms	802.1x RADIUS, AES, EAP-FAST, EAP-PEAP, EAP-TLS, EAP-TTLS, FIPS 140-2, MSCHAPv2, TKIP, WPA, WPA2, WPA2-PSK, WPS
Authentication method	RADIUS
Ethernet LAN (RJ-45) ports	1
Supported protocols	IPv4/IPv6, TCP, UDP, ICMP, ARP, Auto-IP, DNS, (S)FTP
Frequency band	2.4 / 5 GHz
Cabling technology	10/100BASE-T(X)
Networking standards	IEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11d, IEEE 802.11g, IEEE 802.11h, IEEE 802.11i, IEEE 802.11n, IEEE 802.1x, IEEE 802.3, IEEE 802.3af, IEEE 802.3at, IEEE 802.3u
Ethernet LAN data rates	10, 100 Mbit/s

Weight and Dimensions

Weight	350 g
Dimensions (WxDxH)	110 x 89 x 26 mm