8: Device Ports
SLC™ Console Manager User Guide 118
Figure 8-11 View Host Lists
2. View, add, or update the following:
Host Parameters
3. You have the following options:
- To add a host to the host list, click the right arrow. The host displays in the Hosts box.
Host List Id Displays after a host list is saved.
Host List Name Enter a name for the host list.
Retry Count Enter the number of times the SLC console manager should attempt to retry
connecting to the host list.
Authentication Select to require authentication when the SLC unit connects to a host.
Host Name or IP address of the host.
Protocol Protocol for connecting to the host (TCP, SSH, or Telnet).
Port Port on the host to connect to SLC console manager.
Escape Sequence The escape character used to get the attention of the SSH or Telnet client. It is
optional, and if not specified, Telnet and SSH use their default escape character.
For Telnet, the escape character is either a single character or a two-character
sequence consisting of '^' followed by one character. If the second character is '?',
the DEL character is selected. Otherwise, the second character is converted to a
control character and used as the escape character.
For SSH, the escape character is a single character.
To Next Page
Loading...
Need help?
General