13: Maintenance
SLC™ Console Manager User Guide 235
3. Click the Generate Report button. In the upper left of the Generated Status/Reports page
displays a list of reports generated.
Figure 13-10 Generated Status/Reports
4. To email these report(s), follow the instructions in Emailing Logs and Reports (on page 236).
Status Commands
These commands for the command line interface correspond to the web page entries described
above.
To display device port modes and states for one or more ports:
show portstatus [deviceport <Device Port List or Name>] [email <Email
Address>]
You can optionally email the displayed information.
IP Routes Displays the routing table.
Connections Displays all active connections for the SLC unit: Telnet, SSH, TCP, UDP,
device port, and modem.
System Configuration –
Complete
Displays a complete snapshot of the SLC settings.
System Configuration –
Basic
Displays a snapshot of the SLC unit's basic settings (for example, network,
date/time, routing, services, console port).
System Configuration –
Authentication
Displays a snapshot of authentication settings only (including a list of all
localusers).
System Configuration -
Devices
Displays a snapshot of settings for each device port.
To Next Page
Loading...
Need help?
General