5: Web and Command Line Interfaces
SLC™ Console Manager User Guide 48
a. Enter your SLC user name and press Enter.
b. Enter your SLC password and press Enter.
Note: The system administrator may have changed the password using one of the
Quick Setup methods in the previous chapter.
To log in any other user:
1. Enter your SLC user name and press Enter.
2. Enter your SLC password and press Enter.
Logging Out
To log out of the SLC command line interface, type logout and press Enter.
Command Syntax
Commands have the following format:
<action> <category> <parameter(s)>
where
<action> is set, show, connect, admin, diag, pccard, or logout.
<category> is a group of related parameters whose settings you want to configure or view.
Examples are ntp, deviceport, and network.
<parameter(s)> is one or more name-value pairs in one of the following formats:
Table 5-2 Actions and Category Options
<parameter name> <aa|bb>
User must specify one of the values (aa or bb) separated by a
vertical line ( | ). The values are in all lowercase and must be
entered exactly as shown. Bold indicates a default value.
<parameter name> <Value>
User must specify an appropriate value, for example, an IP address.
The parameter values are in mixed case. Square brackets [ ]
indicate optional parameters.
Action Category
set
auth | cifs | cli | command | consoleport | datetime |
deviceport | group | history | hostlist | ipfilter |
kerberos | ldap | localusers | log | menu | network | nfs |
nis | ntp | password | radius | remoteusers | routing |
script | services | slcnetwork | sshkey | tacacs+ |
temperature | usb
1
| vpn
To Next Page
Loading...
Need help?
General