15: Command Reference
SLC™ Console Manager User Guide 252
Should you make a mistake while typing, backspace by pressing the Backspace key and/or
the Delete key, depending on how you accessed the interface. Both keys work if you use
VT100 emulation in your terminal access program when connecting to the console port. Use
the left and right arrow keys to move within a command.
Use the up and down arrows to scroll through previously entered commands. If desired,
select one and edit it. You can scroll through up to 100 previous commands entered in the
session.
To clear an IP address, type 0.0.0.0, or to clear a non-IP address value, type CLEAR for
parameters which accept the CLEAR command. CLI parameters which accept CLEAR are
listed at the beginning of each section.
When the number of lines displayed by a command exceeds the size of the window (the
default is 25), the command output is halted until you are ready to continue. To display the
next line, press Enter, and to display the page, press the space bar. You can override the
number of lines (or disable the feature altogether) with set cli.
Deprecated Commands
Deprecated commands in this release are as follows:
set locallog (replaced by set log clear (on page 287))
show locallog (replaced by show log local (on page 288))
Administrative Commands
admin banner login
Syntax
admin banner login <Banner Text>
Description
Configures the banner displayed after the user logs in.
Note: To go to the next line, type \n and press Enter.
admin banner logout
Syntax
admin banner logout <Banner Text>
Description
Configures the banner displayed after the user logs out.
Note: To go to the next line, type \n and press Enter.
admin banner show
Syntax
admin banner show
To Next Page
Loading...
Need help?
General