SLC™ Console Manager User Guide 315
Appendix A: Bootloader
The SLC console manager provides a bootload command interface. This interface is only
accessible through the SLC console port.
Accessing the Bootloader
To access the bootloader CLI:
1. Power up the SLC console manager.
2. Type x15 within 10 seconds of power up. The bootloader halts the boot procedure and
displays a Lantronix command prompt.
Bootloader Commands
Table A-1 User Commands
help
Lists and prints the command list and online help.
?
An alias for help.
boot
Boot default (runs bootcmd).
bootcheck
Checks boot bank information.
bootinfo
Displays boot bank information.
bootsel 1|2
Selects boot bank 1 or boot bank 2.
IDE
Accesses the IDE sub-system.
mtest
Performs a simple test of the RAM.
showconf
Displays hardware configuration.
su cust|admin
Switches to another user: from cust (customer) to admin (administrator) and
vice versa.
version
Prints the bootloader version.
whoami
Displays information about the current user.
To Next Page
Loading...
Need help?
General