13: Maintenance
SLC™ Console Manager User Guide 223
Figure 13-2 Manage Configuration Files
2. To delete files, select one or more files and click the Delete File button.
3. To download a new firmware file, click the Delete File button.
4. To rename a listed file, select the file, type the new file name into the New File Name field,
and click the Rename File button.
Administrative Commands
These commands for the command line interface correspond to the web page entries described
above.
To copy the boot bank from the currently booted bank to the alternate bank (for dual-boot
SLB/SLC units):
admin firmware copybank
To reboot the SLC:
admin reboot
Note: The front panel LCD displays the "Rebooting the SLC" message, and the normal
boot sequence occurs.
To prepare the SLC console manager to be powered off:
admin shutdown
Note: When you use this command to shut down the SLC unit, the LCD front panel
displays "Shutting down the SLC console manager," followed by a pause, and then
"Shutdown complete." When "Shutdown complete" displays, it is safe to power off the SLC
unit. This command is not available on the web page.
To list current hardware and firmware information:
admin version
To Next Page
Loading...
Need help?
General