15: Command Reference
SLC™ Console Manager User Guide 270
Description
Displays NTP settings.
Device Commands
set command
Syntax
set command <Device Port # or Name or List> <one or more parameters>
Parameters
slp|servertech auth login <User Login>
slp|servertech config [prompt <Command Prompt>]
[numoutlets <Number of Outlets>]
[numexpoutlets <Number of Expansion Outlets>]
slp|servertech restart
slp|servertech outletcontrol state <on|off|cyclepower>
[outlet <Outlet #>] [tower <A|B>]
slp|servertech outletstate [outlet <Outlet #>] [tower <A|B>]
slp|servertech envmon
slp|servertech infeedstatus
slp|servertech system
Description
Sends commands to (or control) a device connected to an SLC device port over the serial port.
Note: Currently the only devices supported for this type of interaction are the SLP power
manager, ServerTech CDU and Sensorsoft devices.
Device Port Commands
set deviceport port
Syntax
set deviceport port <Device Port # or List or Name> <one or more
parameters>
Note: An example would be set deviceport port 2-5,6,12,15-16 baud
2400.
Parameters
auth <pap|chap>
banner <Banner Text>
baud <300-230400>
breakseq <1-10 Chars>
calleridcmd <Modem Command String>
calleridlogging <enable|disable>
To Next Page
Loading...
Need help?
General