13: Maintenance
SLC™ Console Manager User Guide 225
<Config Params to Preserve> is a comma-separated list of current configuration
parameters to retain after the config restore or factory defaults:
nt – Networking ra - Remote Authentication
sv – Services dp – Device Ports
dt – Date/Time ub - USB
lu – Local Users
To save the current SLC configuration to a selected location:
admin config save <Config Name> location
<default|ftp|sftp|nfs|cifs|usb|pccard> [nfsdir <NFS Mounted Dir>]
[usbport <u1>] [pccardslot <upper|lower>]
To delete a saved configuration:
admin config delete <Config Name> location <default|cifs|usb>
[usbport <u1>] [pccardslot <upper|lower>]
To list the configurations saved to a location:
admin config show <default|ftp|sftp|nfs|cifs|usb|pccard>
[nfsdir <NFS Mounted Dir>] [usbport <u1>]
[pccardslot <upper|lower>]
To run the quick setup script:
admin quicksetup
System Logs
The Maintenance > System Logs page allows you to view various system logs. (See
Chapter 7: Services on page 68 for more information about system logs.) You can also clear logs
on this page.
To view system logs:
1. Click the Maintenance tab and select the System Logs option. The following page displays:
To Next Page
Loading...
Need help?
General